Support

FAQs


Assembly and Connection Samsung NASA

Connection

Aidoo Samsung NASA Wi-Fi controller

The Samsung unit controller must remain working in parallel with your Aidoo.

Perform all of the connections with a total absence of power.

Follow these steps to connect them:

  1. Fix your Aidoo close to the AC unit to be controlled using the material supplied (double-sided adhesive tape or screws).

    Important: Check that you have a Wi-Fi signal available before fixing it.
    Assembly Aidoo

  2. Disconnect the indoor unit.
  3. Connect your Aidoo to the terminal of the indoor unit using the supplied cable, 3-4 (F3-F4).
    Connection Aidoo SA2
  4. Power the indoor unit. Check the LED:
    green (blinking)
    red (solid)
860