How do I associate a wireless Lite thermostat?

To associate a wireless Lite thermostat, it is first necessary to open the wireless association channel. It can be done in two ways: by pressing SW1 on the main control board or in the Wireless module parameter in the System advanced settings menu, zone parameters.

Once the wireless channel is open, select the zone number for that thermostat through the microswitch at the back of the thermostat. Flip up the number corresponding to the zone. Then insert the thermostat's battery and press the on/off button. If it has been properly associated, the green LED on button will blink five times.

For further information, see the Installation Manual.

Airzone control tech support