Support

FAQs


Domestic Heating Water production

Domestic Heat Water control

If an aerothermal unit is paired to a group, inside that group options will apear a specific menu to control the Domestic Heat Water production, listed below the zones list.

Keep in mind that whilst the aerothermal unit is producing Domestic Hot Water the air of that zone cannot be conditioned. This zone will show a warning in that case.

acs

Turn on/off the Domestic Heat Water production.

  1. On the drop-down menu press the option Groups.

  2. Press the group that includes the unit you wish to control.
    Zone menu

  3. Domestic Heat Water production units are listed below the zone list, press over the one you wish to control.
    acs_menu

  4. Press the On/Off button.
    acs_on/off

Establish the setpoint temperature

  1. On the drop-down menu press the option Groups and press the group that includes the unit you wish to control.

  2. Press the Domestic Heat Water production unit that you wish to control.

  3. Adjust the set-point temperature by sliding on the screen..

    acs_setpoint

Powerful Mode

The Powerful mode is intended to produce Domestic Hot Water in the least time, for which Aidoo automatically adjusts and blocks the setpoint temperature to its maximum level to ensure the unit produces domestic hot water at maximum power.

Follow the steps listed below to enable Powerful mode:

  1. On the drop-down menu press the option Groups and press the group that includes the unit you wish to control.

  2. Press the Domestic Heat Water production unit that you wish to control.

  3. Press the Powerful mode icon to enable/disable it. When enabled the temperature selector automatically moves up to the maximum available value and blocks itself showing a lock icon.

    acs_powerful

1542