Assembly and Connection Daikin Sky Air / VRV


Aidoo Daikin Sky Air / VRV Wi-Fi controller

The unit controller must remain working in parallel with your Aidoo and its operating mode changed to “Sub RC” (Check the Daikin remote controller Instructions manual)

Perform all of the connections with a total absence of power.

Follow these steps to connect them:

  1. Fix your Aidoo close to the AC unit to be controlled using the material supplied (double-sided adhesive tape or screws).

    Important: Check that you have a Wi-Fi signal available before fixing it.
    Assembly Aidoo

  2. Disconnect the indoor unit.
  3. Connect the Aidoo to the terminals of the indoor unit using the supplied cable, X35A/X18A and P1P2.
    Connection Aidoo DA1
  4. Power the indoor unit. Check the LED:
    green (blinking)
    red (solid)