Support

FAQs


Assembly and Connection Panasonic

Connection

Aidoo Panasonic Wi-Fi controller

The Panasonic unit controller must remain working in parallel with your Aidoo.

Perform all of the connections with a total absence of power.

Follow these steps to connect them:

  1. Fix your Aidoo close to the AC unit to be controlled using the material supplied (double-sided adhesive tape or screws).

    Important: Check that you have a Wi-Fi signal available before fixing it.
    Assembly Aidoo

  2. Disconnect the indoor unit.
  3. Connect the Aidoo to the R1 and R2 terminals of the indoor unit using the supplied cable.
    Connection Aidoo PAN
  4. Power the indoor unit. Check the LEDs:
    green (blinking)
    red (solid)
1463