Support

FAQs


Create a new schedule

Schedules

Create a new schedule

The application allows you to create and execute a maximum of 24 time schedules associated to each group.
  1. On the drop-down menu press the option Groups.

  2. Press the group that includes the zone you wish to control.

    Zone menu

  3. Press the time schedule icon.

    Schedules icon

  4. Press Add time schedule icon.

    Schedules add

    Domestic heating water schedules management is operated independently and showed below to the air conditioning schedules list.
  5. Establish a name for the schedule.

    Schedules name

  6. Select the days of the week when the schedules will take place and set the starting time of the schedule.

    Schedules time

  7. Select the parameters of the schedule:

    • On and off.
    • Operating mode.
    • Set-point temperature.
    • Fan-speed.
    On and off, operating mode and set-point temperature are the only parameters available in Domestic heating water schedules.

    Schedules parameters

  8. Assign the schedule to the zones.

    Schedules and scenes are not available in zones associated to aerothermal units if they are configured in LWT mode. If you have any doubt, please check the Instruction manual of the unit.

    Schedules zones

  9. Press Done to save the changes or Cancel to return to the previous menu.

    Schedules confirm

    The schedules don’t have a finishing time, to counter a switching-on schedule it is necessary to create a switching-off schedule.
5892