The ATH e-CLIMA is a device designed to control air-conditioning units

(duct-based units, FAN COILS, etc.) and boilers. lt has five outputs to

relay to control etectromechanical equipment, cooters or boilers. lf

the equipment being controlled has an infrared remate control, it can

be controlled by an infrared emitter to send previous tearned

packets, thereby eliminate the need for the equipment's cordless

thermostat.

The ATH e-CLIMA attows air-conditioning and heating to be controlled

by zone, with a maximum of 16 possible zones. Via the ATH-Zonepad

installed in a room and thanks to its rote as a thermostat, you can

control both the air flow in the zones (via the use of motorised

grilles, diffusers and gates) and heating (electric radiators, etectric

vatves for heated flooring, etc.) in the zone.

In arder to add protection to the equipment controlled (airconditioning

and heating), two protection sensors are built in to

measure the temperatures at the air-conditioning unit and boiler

returns. The protection temperature can be set in both cases.

Equipped with two voltage-free digital inputs:

Remate stop/start input for the air-conditioning system (contact

normally open).

Fire-alarm signal input (contact normatty closed).

The ATH e-CLIMA has a five-pin output for connection to the

SPRESIONSZ pressure sensor to etectronically control the excess

pressure gate (bypass).

The device is shipped with a 12V DC power source.