Support

FAQs

Assembly and Connection Gree U-Match R410A

Connection

Aidoo Gree U-Match R410A Wi-Fi controller

The Gree unit controller must remain working in parallel with your Aidoo.

Perform all of the connections with a total absence of power.

Follow these steps to connect them:

  1. Fix your Aidoo close to the AC unit to be controlled using the material supplied (double-sided adhesive tape or screws).

    Important: Check that you have a Wi-Fi signal available before fixing it.
    Assembly Aidoo

  2. Access the setting interface of the Gree thermostat and set the value 01 in the function 10 and access the unit address settings menu of the Gree thermostat and set the value 01 (refer to the Gree service manual).
  3. Disconnect the indoor unit.
  4. Connect the Aidoo to the terminals of the indoor unit using the supplied number cable, CN23 and COM-BMS1.
    Connection Aidoo GRE
  5. Power the indoor unit. Check the LED:
    green (blinking)
    red (solid)
2951
All FAQs